Felps Clarifying Anti-Residue Shampoo and Okra Quiabo Brazilian XBTX Thermal Sealing 1000ml

Steps

1. Perform a strand test and assess the hair's condition, previous chemical treatments and heat tolerance before starting.
2. Wet hair thoroughly with warm water. Apply Felps Clarifying Anti-Residue Shampoo to the scalp and lengths, massage into a lather and rinse completely. Repeat if needed to remove heavy product buildup.
3. Towel-dry, then blow-dry hair until completely dry before applying the thermal sealing treatment.
4. Divide hair into four sections. Wear protective gloves and use a tint brush to distribute Felps Okra Quiabo XBTX Thermal Sealing through thin sections, working from the lower sections upwards.
5. Keep the product approximately 1cm away from the scalp and avoid oversaturating the hair.
6. Cover with a plastic cap and process according to the supplied guidance: 30–40 minutes for fragile or blonde hair, or 60–80 minutes for thick or resistant hair.
7. Rinse thoroughly until all treatment product has been removed.
8. Blow-dry and smooth the hair with a brush. If appropriate for the assessed hair condition, finish with a flat iron in thin sections, using only the manufacturer's specified temperature and number of passes.

Professional tip

Thorough cleansing, even application and complete rinsing are essential to a smooth, glossy finish. Adjust the process to hair porosity, strength and chemical history, and avoid excessive heat on fragile or bleached hair. Never apply to an irritated or damaged scalp. This is a professional-use treatment: verify the current manufacturer's instructions, safety documentation and ventilation requirements before proceeding, especially the processing times and heat settings.

Full ingredients

Felps Clarifying Anti-Residue Shampoo 1000ml

Aqua; Sodium Laureth Sulfate; Cocamide DEA; Sodium Chloride; Cocamidopropyl Betaine; Propylene Glycol; Parfum; Disodium EDTA; Argania Spinosa Kernel Oil; Macadamia Ternifolia Seed Oil; Sodium Citrate; Benzyl Salicylate; Benzoic Acid; Hexyl Cinnamal; Alpha-Isomethyl Ionone; D-Limonene; Coumarin; Citric Acid; Eugenol; Citronellol; Geraniol; Citral; Methylisothiazolinone.

Felps Okra Quiabo Brazilian XBTX Thermal Sealing 1000ml

Aqua; Parfum/ Citronellol/ Coumarin/ Linalool; Ceteareth-20; Alcohol; Citric Acid; Propylene Glycol; Lactic Acid; Algin; Caprylic/Capric Triglyceride; Glyceryl Oleate Citrate; Sodium Benzoate; Potassium Sorbate; Methylchloroisothiazolinone/ Methylisothiazolinone; Abelmoschus Esculentus Fruit Extract; Macadamia Ternifolia Seed Oil; Argania Spinosa Kernel Oil; Sodium Hyaluronate; Cetrimonium Chloride; Behentrimonium Methosulfate; Cetearearyl Alcohol; Cetyl Alcohol; Paraffinum Liquidum; Linum Usitatissimum (Linseed) Seed Extract.

How do the key ingredients function in Felps Clarifying Anti-Residue Shampoo and Okra Quiabo Brazilian XBTX Thermal Sealing 1000ml?

• Sodium Laureth Sulfate (Shampoo) removes oil, styling residue and buildup to leave hair thoroughly cleansed before a compatible salon service.
• Cocamidopropyl Betaine (Shampoo) works with the main cleanser to create lather and distribute the shampoo evenly through the hair.
• Disodium EDTA (Shampoo) binds certain minerals in water, helping the cleansing formula work more consistently.
• Argan Oil and Macadamia Oil (Both products) provide emollient conditioning to help hair feel softer, smoother and more manageable. Their presence does not make the shampoo a substitute for a conditioning treatment.
• Okra Extract (Thermal Sealing) provides botanical conditioning support for a smoother hair feel and improved manageability.
• Sodium Hyaluronate (Thermal Sealing) is a moisture-attracting ingredient that supports a supple, conditioned finish.
• Cetrimonium Chloride and Behentrimonium Methosulfate (Thermal Sealing) help reduce static and friction, making hair easier to detangle and align. Behentrimonium Methosulfate is a conditioning agent, not a sulphate cleanser.
• Cetearearyl Alcohol and Cetyl Alcohol (Thermal Sealing) are listed as fatty alcohols that contribute softness, slip and a creamy conditioning feel. Confirm the spelling of Cetearearyl Alcohol against the bottle.
• Paraffinum Liquidum (Thermal Sealing) helps lubricate the hair surface, reducing roughness and improving combability.
• Linseed Extract (Thermal Sealing) complements the formula's conditioning ingredients and supports a smoother-looking finish.

Why choose Felps Clarifying Anti-Residue Shampoo and Okra Quiabo Brazilian XBTX Thermal Sealing 1000ml?

Beautifully sleek hair starts with thoughtful preparation. Felps Clarifying Anti-Residue Shampoo uses an effective cleansing system to lift excess oil, stubborn styling buildup and impurities before a compatible professional smoothing service. Cocamidopropyl Betaine helps the shampoo spread and lather, while Disodium EDTA supports cleansing performance in mineral-containing water. Argan and macadamia oils add a conditioning touch, making this an appealing first step when ordinary shampoo is not designed for professional treatment preparation.

Follow with Felps Okra Quiabo XBTX Thermal Sealing for a treatment focused on smoother alignment, reduced frizz and reflective shine. Its combination of okra and linseed extracts, argan and macadamia oils, sodium hyaluronate and conditioning agents helps improve softness, slip and manageability during a professionally controlled heat-finishing service. Together, the products offer a purposeful cleanse-and-smooth routine rather than two unrelated haircare steps. The exact straightening result and safety requirements depend on the treatment protocol; the supplied ingredients alone do not establish a permanent straightening mechanism. Discover a more polished, beautifully manageable finish with Felps professional haircare - Everything Keratin

Product name
Felps Clarifying Anti-Residue Shampoo and Okra Quiabo Brazilian XBTX Thermal Sealing 1000ml

Brand
Felps Professional

Product category
Professional hair cleansing and progressive smoothing treatment

Set contents
Felps Clarifying Anti-Residue Shampoo 1000ml and Felps Okra Quiabo Brazilian XBTX Thermal Sealing 1000ml

Individual bottle sizes
1000ml / 1L / 33.8 fl oz each

Country of origin
Brazil, according to the supplied product information

Treatment system
Two-step cleansing preparation and professional thermal sealing

Primary treatment focus
Deep cleansing, smoother hair alignment, frizz and volume control, softness, shine and manageability

Recommended hair types
Frizzy, wavy, curly, coarse and difficult-to-manage hair seeking a smoother appearance

Hair concerns
Styling buildup, unwanted volume, flyaways, roughness, dullness and difficult detangling

Clarifying Shampoo key ingredients
Sodium Laureth Sulfate, Cocamidopropyl Betaine, Disodium EDTA, Argania Spinosa Kernel Oil and Macadamia Ternifolia Seed Oil

Clarifying Shampoo cleansing system
Sodium Laureth Sulfate and Cocamidopropyl Betaine provide cleansing and lather.

Clarifying Shampoo pH
8.0–9.0, according to the supplied product description; not independently verified

Clarifying Shampoo sulphate content
Contains Sodium Laureth Sulfate (SLES)

Clarifying Shampoo purpose
Removes excess oil, styling residue and accumulated impurities before compatible professional services

Thermal Sealing key ingredients
Abelmoschus Esculentus Fruit Extract (Okra Extract), Argania Spinosa Kernel Oil, Macadamia Ternifolia Seed Oil, Sodium Hyaluronate and Linum Usitatissimum Seed Extract (Linseed Extract)

Thermal Sealing conditioning agents
Cetrimonium Chloride and Behentrimonium Methosulfate support detangling, reduced friction and improved manageability.

Thermal Sealing softening ingredients
Cetyl Alcohol, fatty alcohols and Paraffinum Liquidum contribute lubrication, softness and a smoother hair feel.

Thermal Sealing technology
The supplied product description refers to Felps Lisselini technology. Its precise chemical mechanism has not been independently established.

Hydrolysed keratin content
No hydrolysed keratin identified in the supplied Thermal Sealing ingredient list

Formaldehyde disclosure
Formaldehyde is not explicitly identified in the supplied ingredient list. This does not establish that the product is free from formaldehyde release or other hazardous emissions when heated.

Shampoo preparation
Wet hair thoroughly, apply shampoo, massage and rinse. Repeat if necessary.

Preparation before sealing
Hair must be clean and completely dry according to the supplied application guidance.

Thermal Sealing application
Apply with a tint brush through thin sections, maintaining approximately 1cm distance from the scalp.

Application equipment
Protective gloves, tint brush, sectioning clips, suitable blow dryer and professional flat iron where permitted by the manufacturer's instructions

Strand test
Required before the thermal sealing service to assess hair condition and compatibility

Processing time for fragile or blonde hair
30–40 minutes according to supplied instructions; verify against the current manufacturer's protocol before use

Processing time for thick or resistant hair
60–80 minutes according to supplied instructions; verify against the current manufacturer's protocol before use

Rinsing
The supplied instructions specify complete removal of the thermal sealing treatment before blow drying.

Heat finishing
Blow dry and brush smooth. Flat iron only where appropriate and according to verified manufacturer temperature and pass instructions.

Treatment duration
The duration of visible smoothing results has not been independently verified and may vary according to hair condition and aftercare.

Professional treatment compatibility
Intended for professional smoothing services. Compatibility with previous colouring, bleaching, relaxing, perming, keratin or nanoplasty treatments requires individual assessment.

Professional use
Professional application recommended. Follow current manufacturer instructions and applicable salon safety requirements.

Home use
The shampoo may be used for occasional clarifying. The thermal sealing treatment is not recommended for unsupervised home application.

Ventilation
Follow the manufacturer's safety data sheet and applicable workplace ventilation requirements, particularly during heat processing.

Scalp precautions
Avoid application of the thermal sealing treatment directly to the scalp or onto irritated or damaged skin.

Pregnancy and breastfeeding
Follow current manufacturer safety guidance and seek appropriate medical advice before considering the thermal sealing treatment.

Children
Not recommended for children according to the supplied product information.

Storage
Keep containers securely closed in a cool, dry location away from direct sunlight and excessive heat.

Ingredient verification
Key ingredients are based on the supplied formulations. Confirm the current packaging, complete INCI, manufacturer application protocol and safety documentation before professional use.